Arena™ Application Instructions
Step 1: First Coat of Arena™
After priming the substrate with VariPrime™, apply the first coat of
Arena™ to an area of about 4 square feet.
This first coat should be a thin, even coat. Apply using random,
decorative trowel strokes.
Step 2: Texture Coat
While the first coat is still wet, apply a texture coat of Arena™.
Finished texture coat.
Step 3: Colorwash
Distress a sponge float by tearing the edges. This will prevent leaving
linear float impressions during use.
While texture coat is still wet, lightly mist VariStain™ onto the surface.
Use the distressed float to press the VariStain™ into the finish and
remove any spots or drips.
Finished Arena™.
